1. Rotate the bowl into the correct angle connector.
2. Turn the stem onto the additional end of the connector.
3. Cover up the stem with hex nuts.
4. Take the previous 2 nuts off.
5. Take the jug lid and drill a hole so the threaded part fits in snugly.
6. twist the cap onto the stalk and put the hex nuts on.
7. Drill a small hole in the extremely bottom of the urn so you can cover it with a piece of tape.
8. coat the hole with a piece of channel tape.
9. Fill the jug with water.
10. Fill the bowl with your choice of granulated incense.
11. Rotate the reducer on.
12. Twist the lid on.
13. Go external.
14. Hold the lit blaze at the hole in the reducer and at the equivalent time unplugs the hole at the bottom.
15. Hold the burn there for about 10 seconds; the flame should be sucked into the hole.
16. The bottle should fill with smoke.
17. When the water is all gone remove the lid and squeeze the sides of the jug it will generate a mushroom cloud.
18. Repeat until the bowl is unfilled.